Your Polaris RZR Pro R is built to be pushed hard and your air filter should keep up. The S&B Replacement Filter is a direct replacement for OEM part 7082436, delivering clean airflow without choking performance. With a 99.96% efficiency rating, it captures the fine dust that can rob power and shorten engine life while still flowing more air than stock.
This dry cleanable filter is all about convenience and consistency. Cleaning takes minutes and does not require oil, so you spend less time wrenching and more time riding. With 1.6% increased airflow over the factory filter, your engine stays responsive and protected every time you roll into the throttle. A simple upgrade that makes sense for serious riders.
Features:
- Replaces 7082436
- Filter type: Dry cleanable
- Efficiency rating of 99.96%
- Provides 1.6% more air flow than stock
- Super easy to clean
- Wearing protective eyewear, remove dirty filter and tap top several times on hard surface
- Blow out the filter from the inside using the nozzle no closer than 1" from the filter, continuously moving the nozzle (no more than 30 PSI)
- Blow out the outside of the filter at an angle, being careful to not blow debris back inside
- Blow out once more from the inside
- Use standard garden hose turned up to 75% of it's max strength to wash the filter from the inside out
- Wash the outside to remove the remaining debris
- Repeat last 2 steps until filter appears white again then allow to dry (do not use hot air)
âš California Proposition 65 Warning âš WARNING: This product can expose you to chemicals including carbon black, silica - crystalline, methylene chloride, and lead which are known to the State of California to cause cancer, and lead, which is known to the State of California to cause birth defects or other reproductive harm.
