Ultra-Strong Polaris Xpedition Rear A-Arms
Your Xpedition is the ultimate overlanding machine. But when you load it up with gear and take on challenging terrain, you need all the strength you can get. Upgrade to SuperATV's Polaris Xpedition Atlas Pro Rear A-Arms to make sure you're always prepared. They deliver extreme strength, adjustable camber, and high-clearance bends. Atlas Pro has the strength and performance your Xpedition needs.
Massive 1.5" Tubing Can Handle Anything
These Polaris Xpedition rear A-arms are built for battle with 1.5" x 0.138" wall steel DOM tubing. That means that they can slam into rocks and stumps without getting bent out of shape. They're perfect for long adventures through rarely used trails where you're weighed down with gear and can't afford a failure. Not to mention, they come with UHMW bushings preinstalled.
High-Clearance Bends Make Your Ride Smoother
Our Polaris Xpedition rear A-arms use a high-clearance design to increase ground clearance by 1.5 inches. That design lets these A-arms cruise over obstacles without getting hung up. The result is a smoother ride that you'll appreciate in the cab.
Adjustable Camber
Our A-arms use adjustable pivot blocks so you get total camber control. That lets you get your camber just right if you add a lift or weigh your suspension down with heavy cargo. When your camber is set right, you get better traction and handling, and you avoid premature tire wear.
The information in this listing was collected and considered accurate from https://www.superatv.com/polaris-xpedition-atlas-pro-1-5-rear-offset-a-arms on 03/18/2025 11:41 PM
Your Xpedition is the ultimate overlanding machine. But when you load it up with gear and take on challenging terrain, you need all the strength you can get. Upgrade to SuperATV's Polaris Xpedition Atlas Pro Rear A-Arms to make sure you're always prepared. They deliver extreme strength, adjustable camber, and high-clearance bends. Atlas Pro has the strength and performance your Xpedition needs.
Massive 1.5" Tubing Can Handle Anything
These Polaris Xpedition rear A-arms are built for battle with 1.5" x 0.138" wall steel DOM tubing. That means that they can slam into rocks and stumps without getting bent out of shape. They're perfect for long adventures through rarely used trails where you're weighed down with gear and can't afford a failure. Not to mention, they come with UHMW bushings preinstalled.
High-Clearance Bends Make Your Ride Smoother
Our Polaris Xpedition rear A-arms use a high-clearance design to increase ground clearance by 1.5 inches. That design lets these A-arms cruise over obstacles without getting hung up. The result is a smoother ride that you'll appreciate in the cab.
Adjustable Camber
Our A-arms use adjustable pivot blocks so you get total camber control. That lets you get your camber just right if you add a lift or weigh your suspension down with heavy cargo. When your camber is set right, you get better traction and handling, and you avoid premature tire wear.
The information in this listing was collected and considered accurate from https://www.superatv.com/polaris-xpedition-atlas-pro-1-5-rear-offset-a-arms on 03/18/2025 11:41 PM
