KFI Winch Mount - Arctic Cat, Textron Prowler 500, Tracker 500S

Take the guesswork out of setting up your winch with the KFI Winch Mount for the Arctic Cat and Textron Prowler 500, as well as the Tracker 500S. Built in the USA from rugged 1/4" steel, this mount is bead blasted and powder coated black, giving it the strength and finish to handle years of hard use without rusting or weakening. Installation is simple with all hardware and instructions included, so you can focus less on the install and more on putting your machine to work with a winch setup you can count on.

Features:

• 100% made in USA
• Constructed of 1/4" steel
• Unlike all other mount competitors our mounts are metal bead blasted before they are powder coated for the best possible finish prep
• Powder coated black for supreme durability
• Very easy to install
• Complete installation instructions included
• Satisfaction guaranteed
• Roller fairlead and winch not included

Designed to work with the following winches:.

• KFI: ST17 / A2000 / A2500-R2 / A3000 / U45-R2 / U45w-R2 / SE25 / SE35 / SE45-R2 / SE45w-R2
• KFI: AM-25 / AM-35 / AS-25 / AS-35
• KFI: AS-50x / AS-50wx
• WARN: VRX 25 / VRX 25-S / VRX 35 / VRX 35-S / VRX 45 / VRX 45-S
• WARN: A2000 / A2500 / U2500 / 1.5ci / 2.5ci / 2.5ce / 3.0ci / 3.0ce / 3.0s
• WARN: RT15 / RT25 / RT30 / XT15 / XT25 / XT30
• WARN: RT40 / XT40
• WARN: Vantage 2000-3000lbs / ProVantage 2500-3500lbs
• WARN: Vantage 4000lbs / ProVantage 4500lbs (Will use WIDE fairlead that comes with your winch.)
• RAMSEY: ATV2500 / ATV3000
• SUPERWINCH: Terra25 / Terra35 / Terra45 / Terra 2500 (SR) / Terra 3500 (SR) / Terra 4500 (SR) / A3500 / LT2000 / UT3000 / LT2500 / LT3000 / LT4000 (SR) / LT4000ATV / LT4000UTV
• MILE MARKER: PE2.5 / PE 3.5 / VMX2.5 / PE2000 / PE3000 / PE2500 / PE3500
• CYCLE COUNTRY: Work Power 2500 / PowerMax 2500 and 3500
• BADLAND: 2-Hole Winches
• Requires additional part #100480
• CHAMPION: 2-Hole Winches
• Requires additional part #100480
• KEEPER CORP. TRAKKER: KT2500 / KT3000 / KT2500C / KT3000C / KT4000 / KT4000C
• KEEPER CORP. TRAKKER: KT2000
• Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF.
• Requires additional part #100480
• SMITTYBILT: XRC 2.0
• Requires additional part #100480
• SMITTYBILT: XRC 3.0 / XRC 4.0
• XGEAR: X3000 / X4000
• VENOM: 2000 / 2500 / 3000 / 3500 / 4000 / 4500 / 5000 (Hardcore Series)
• All with 3.00" x 4.875" Bolt Pattern mount-up
• All with 3.00" x 6.600" Bolt Pattern mount-up
• Traveller: 1078311
• Traveller: 1078088 / 1078302
• Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF
• Possibly many others with the below standard mounting patterns, call to confirm.
• 4-Hole (3.00" x 4.875" bolt pattern with rollers that are 4.875" bolt pattern)
• 4-Hole WIDE (3.00" x 6.60" bolt pattern with rollers that are 6.600" or 6.000" bolt pattern)
• 2-Hole (3.10" with rollers that are 4.875" bolt pattern)
• Requires additional part #100480
• QUADBOSS: RP25 / RP35