Get ready to launch like never before with the EVP 2-Step Launch Control Upgrade for 2017-21 Can-Am Maverick X3, a game-changing performance feature designed to give you a serious edge from a dead stop. With no piggyback modules or wiring required, this seamless ECU-integrated system allows your Maverick X3 to build massive boost while stationary, holding a preset RPM until you're ready to let it rip. The result? Lightning-fast spool, blistering acceleration and reduced 0-60 times by up to 0.4 seconds. If you're chasing podiums or just want that explosive off-the-line thrill, this is the upgrade your turbo's been waiting for.
Features:
- Launch control allows the engine to build gobs of boost without engaging the belt
- Holds the engine at a preset RPM when the brake is fully depressed and the accelerator pedal is pushed to the floor (vehicle not moving)
- Once engaged, the EVP ECU logic retards the ignition timing and adds fuel which gives the exhaust energy it needs to spool the turbo and build massive boost at low RPM
- Can reduce acceleration 0-60 times by up to .4 of a second
- Does not require any wiring or “piggyback” spark interrupter modules
- Your vehicle must already be tuned with an EVP ECU Power Flash in order to add the Launch Control Upgrade. EVP Launch Control is not compatible with other aftermarket ECU tuning.
- Launch Control Disclaimer: Evolution Powersports is offering customers the option to purchase launch control, which allows the driver to accelerate very quickly from a standstill. Make sure you and any passengers are properly seat-belted and your path is clear. Do not allow an inexperienced driver to use. Even though we have tested launch control extensively at high launch RPM and high boost on both asphalt and sand/dirt without issue, we have not tested all possible scenarios. When you purchase launch control, you are accepting all risk for its use. Evolution Powersports does not accept any liability for injury or damage to the engine/drivetrain. Use responsibly.
- EVP ECU MAIL-IN DISCLAIMER: Bench Flash purchase requires removing and sending in your ECU to: 2018 State Road 35 Somerset, WI 54025. Please print and fill out this ECU SUBMISSION FORM and submit it with your physical ECU. Turnaround time is 24-48 hours days to complete AFTER we receive your ECU.
