Denali UTV Snow Plow Kit - Polaris Ranger

Turn snow removal into a job your Polaris Ranger can handle. The Denali UTV Snow Plow Kit pairs a reinforced straight blade with a 65-degree attack angle that rolls snow forward, helping you clear driveways, open farm lanes and keep access to outbuildings clear. Ten adjustable plow positions let you steer snow away from the places you need to reach.

The kit includes reinforced push tubes, a replaceable steel wear bar, adjustable skid feet and mounting hardware. Once the driveway is clear, pull a pin to detach the plow and get your Ranger back to its everyday duties.

Kit Includes:

• UTV Snow Plow Blade - Straight
• Pushtubes
• Wearbar
• Skid Feet
• Installation hardware and instructions

Plow Mount Features:

• 1/4" steel
• 100% laser cut
• Black, industrial powder coat finish
• Includes mounting hardware and detailed instructions

Blade Features:

• Snow Plow Blade (19 inches scoop) and leading horizontal supports are formed from a single piece of 11-gauge steel
• Four 7-gauge ribs run the full height of the blade
• Three additional 7-gauge horizontal stabilizers support the deepest point of the blade
• 65-degree attack angle and over center design ensures snow rolls up and is thrown forward
• Replaceable 7-gauge steel wear bar included with every kit
• Height and angle adjustable skid feet included

Push Tube Features:

• Impact Resistant Reinforced Pivot Assembly - 2 additional support bars for maximum durability & strength
• Turn system allows you to easily position your plow in 10 different angles - 0, 12.5, 25
• Simple detachment system with the pull of a pin
• Structural tube steel cross bar for added lateral rigidity
• Quick Release Pins included
• 13.5 inches center to center for plow mount tabs
• Extended Push Tubes are designed to be used with SxS/UTVs that have tracks

Pushtube Lift Kits: 

• Push tube Lift Kits bolt directly to the pushtubes, providing 2 or 4 inches of lift
• Pushtube Lift Kits allow plow installation on machines with skid plates, 13"-15" and 15"-17" off the ground
• Lift Kits are for use with DENALI UTV Standard Pushtubes only (not Extended Pushtubes)

Optional Hydroturn Features:

• Hydraulic system is sealed, no need to purchase hydraulic fluid, bleed lines, maintain a reservoir level or change the fluid
• Change the blade angle with ease without leaving your seat
• Heavy duty chrome plated 3/4" cylinder shaft
• No modifications necessary  - bolts directly to the Denali UTV Plow Push Tubes
• Wire harness utilizes weatherproof connectors
• PLEASE NOTE: Extended Pushtubes is not compatible with the Hydraulic Lift System

Optional Plow Pulley Fairlead Features: 

• Roller
  • Replaces the winch fairlead during the plow season
  • For use with Steel AND Synthetic cables
  • Curved cable groove helps eliminate flattening and breaking of cable
  • Bolt Patterns:
    • Standard Spool: 3″ x 4.875″
    • Wide Spool: 3″ x 6.67″
• Sheave
  • Includes pulley, 1/4″ clevis hook and nylon strap
  • Allows greater precision when raising/lowering plow blade and increases the angle of pull
• Cable
  • 12′ length, 1/4″ diameter
  • Single braid, dyneema rope with galvanized steel thimble/eyelet

Fitment:

• MA11752
  • 2020-26 Polaris Ranger 1000 and Ranger XP 1000 models with Factory Front Brushguard
  • 2022-26 Polaris Ranger SP 570 Northstar or Premium

• MA11704
  • 2016-17 Full Size Polaris Ranger 570 models with Pro-Fit Cages
  • 2013-20 Polaris Ranger XP 900 models
  • 2015-18 Polaris Ranger 1000 Diesel models
  • 2017-20 Polaris Ranger XP 1000 models

• MA11700
  • 2009-14 Full Size Polaris Ranger models (NOT XP 900s)

• MA11701
  • 2010-14 Polaris Ranger 400
  • 2017-22 Mid Size Polaris Ranger 500 models
  • 2014 Mid Size Polaris Ranger 800
  • 2014-22 Mid Size Polaris Ranger 570 models
  • 2016-26 Full Size Polaris Ranger 570 models with Round Roll Cage
  • 2015-17 Polaris Ranger ETX
  • 2010-22 Polaris Ranger EV

• MA11707
  • 2002-08 Polaris Ranger models
  • 2008-09 Polaris Ranger Crew models