Snow piling up in the driveway or blocking your property’s access roads? The Denali Pro UTV Snow Plow Kit turns your Polaris RZR into a capable winter cleanup machine. Its curved, reinforced steel blade rolls snow forward and 10 adjustable plow positions help you push it where it needs to go instead of leaving a wall at the end of every pass.
This complete setup includes reinforced push tubes, a replaceable wear bar, adjustable skid feet, a rubber flap, plow flags and mounting hardware. When the work is done, pull a pin to detach the plow and get back to enjoying your RZR.
Kit Includes:
- UTV Snow Plow Blade - Pro Curved
- Pushtubes
- Wearbar
- Skid Feet
- Rubber Flap
- Plow Flags
- Installation hardware and instructions
Plow Mount Features:
- 1/4" steel
- 100% laser cut
- Black, industrial powder coat finish
- Includes mounting hardware and detailed instructions
Blade Features:
- Snow Plow Blade (19-inch scoop) and leading horizontal supports are formed from a single piece of 12-gauge steel
- Four 7-gauge ribs run the full height of the blade
- Three additional 7-gauge horizontal stabilizers support the deepest point of the blade
- 65-degree attack angle and over center design ensures snow rolls up and is thrown forward
- Replaceable 7-gauge steel wear bar included with every kit
- Height and angle adjustable skid feet included
Push Tube Features:
- Impact Resistant Reinforced Pivot Assembly - 2 additional support bars for maximum durability & strength
- Turn system allows you to easily position your plow in 10 different angles - 0, 12.5, 25
- Simple detachment system with the pull of a pin
- Structural tube steel cross bar for added lateral rigidity
- Quick Release Pins included
- 13.5 inches center to center for plow mount tabs
- Extended Push Tubes are designed to be used with SxS/UTVs that have tracks
Pushtube Lift Kits:
- Push tube Lift Kits bolt directly to the pushtubes, providing 2 or 4 inches of lift
- Pushtube Lift Kits allow plow installation on machines with skid plates, 13"-15" and 15"-17" off the ground
- Lift Kits are for use with DENALI UTV Standard Pushtubes only (not Extended Pushtubes)
Optional Hydroturn Features:
- Hydraulic system is sealed, no need to purchase hydraulic fluid, bleed lines, maintain a reservoir level or change the fluid
- Change the blade angle with ease without leaving your seat
- Heavy duty chrome plated 3/4" cylinder shaft
- No modifications necessary - bolts directly to the Denali UTV Plow Push Tubes
- Wire harness utilizes weatherproof connectors
Optional Plow Pulley Fairlead Features:
- Roller
- Replaces the winch fairlead during the plow season
- For use with Steel AND Synthetic cables
- Curved cable groove helps eliminate flattening and breaking of cable
- Bolt Patterns:
- Standard Spool: 3″ x 4.875″
- Wide Spool: 3″ x 6.67″
- Sheave
- Includes pulley, 1/4″ clevis hook and nylon strap
- Allows greater precision when raising/lowering plow blade and increases the angle of pull
- Cable
- 12′ length, 1/4″ diameter
- Single braid, dyneema rope with galvanized steel thimble/eyelet
- All the DENALI Plow Systems require a winch (not included) to raise and lower the plow blade.
- The Polaris RZR XP Turbo S models will not work with KFI Winch Mount or Polaris Winch Mount (p/n: 2883828).
