When winter blankets your property, the Denali UTV Snow Plow Kit for the Can-Am Commander puts snow-clearing power at your fingertips. The straight 19-inch scoop blade is built from a single piece of 11-gauge steel, backed by full-height 7-gauge ribs and reinforced horizontal stabilizers. Its 65-degree attack angle and over-center design help move snow up and forward, while the replaceable 7-gauge wear bar and adjustable skid feet are built for practical, season-after-season use.
The complete package comes with reinforced push tubes featuring a sturdy steel crossbar, a 10-position turning system and quick-release pins for convenient removal. A precision laser-cut 1/4-inch steel mount with a black industrial powder coat finish provides a durable mounting point and installation hardware and instructions are included. If your Commander needs additional clearance, compatible DENALI lift kits add 2 or 4 inches when used with standard push tubes. Get your snow-removal setup ready and put your Commander to work when the flakes start piling up.
Kit Includes:
- UTV Snow Plow Blade - Straight
- Pushtubes
- Wearbar
- Skid Feet
- Installation hardware and instructions
Plow Mount Features:
- 1/4" steel
- 100% laser cut
- Black, industrial powder coat finish
- Includes mounting hardware and detailed instructions
Blade Features:
- Snow Plow Blade (19 inches scoop) and leading horizontal supports are formed from a single piece of 11-gauge steel
- Four 7-gauge ribs run the full height of the blade
- Three additional 7-gauge horizontal stabilizers support the deepest point of the blade
- 65-degree attack angle and over center design ensures snow rolls up and is thrown forward
- Replaceable 7-gauge steel wear bar included with every kit
- Height and angle adjustable skid feet included
Push Tube Features:
- Impact Resistant Reinforced Pivot Assembly - 2 additional support bars for maximum durability & strength
- Turn system allows you to easily position your plow in 10 different angles - 0, 12.5, 25
- Simple detachment system with the pull of a pin
- Structural tube steel cross bar for added lateral rigidity
- Quick Release Pins included
- 13.5 inches center to center for plow mount tabs
- Extended Push Tubes are designed to be used with SxS/UTVs that have tracks
Pushtube Lift Kits:
- Push tube Lift Kits bolt directly to the pushtubes, providing 2 or 4 inches of lift
- Pushtube Lift Kits allow plow installation on machines with skid plates, 13"-15" and 15"-17" off the ground
- Lift Kits are for use with DENALI UTV Standard Pushtubes only (not Extended Pushtubes)
Optional Hydroturn Features:
- Hydraulic system is sealed, no need to purchase hydraulic fluid, bleed lines, maintain a reservoir level or change the fluid
- Change the blade angle with ease without leaving your seat
- Heavy duty chrome plated 3/4" cylinder shaft
- No modifications necessary - bolts directly to the Denali UTV Plow Push Tubes
- Wire harness utilizes weatherproof connectors
- PLEASE NOTE: Extended Pushtubes is not compatible with the Hydraulic Lift System
Optional Plow Pulley Fairlead Features:
- Roller
- Replaces the winch fairlead during the plow season
- For use with Steel AND Synthetic cables
- Curved cable groove helps eliminate flattening and breaking of cable
- Bolt Patterns:
- Standard Spool: 3″ x 4.875″
- Wide Spool: 3″ x 6.67″
- Sheave
- Includes pulley, 1/4″ clevis hook and nylon strap
- Allows greater precision when raising/lowering plow blade and increases the angle of pull
- Cable
- 12′ length, 1/4″ diameter
- Single braid, dyneema rope with galvanized steel thimble/eyelet
- All the DENALI Plow Systems require a winch (not included) to raise and lower the plow blade.
