Secure your motorcycle, ATV or powersports vehicle with confidence using Canyon Dancer Tie-Down Strap Rings from Cheetah's Powersports. Made from durable stainless steel and break tested to 2,000 pounds, these versatile strap rings allow you to create strong tie-down points almost anywhere there’s an 8mm or smaller bolt. Designed to fit large 3/8-inch coated tie-down hooks and 8mm carabiners, they provide a reliable, convenient solution for safer transport and trailer security.
Features:
- Sold in pairs
- Made of stainless steel
- Break tested at 2000 pounds
- Allows the customer to attach tie-downs almost anywhere there is an 8mm or smaller bolt
- Large enough to accept the large size 3/8 inch coated tie down hooks as well as 8mm carabiner
- Must lay flat under the bolt head and never in recessed or countersunk holes, unless the Strap Ring can lay flat inside the recess.
- Position the ring toward the direction of pull, so pulling on the ring does not tend to loosen the bolt.
- Install the strap ring in a place that will not likely snag on riding gear or you.
- Check for proper clearance of wires and control cables by turning forks from lock to lock.
- The bolt you place the strap ring under must still be long enough not to compromise it’s strength or it’s originally intended use.
- Use a longer bolt of equal or greater strength if necessary.
- Using Blue Loc-tite is always a good idea.
- ⚠ California Proposition 65 Warning ⚠ WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.
