The OBDII connector is a standard connection point to the battery on all new vehicles that will allow you to set the 5 watt panel on your dash and charge / maintain your vehicle battery from inside the vehicle.

Use the 6 foot long lead extension with the Battery Tender® Junior, Plus, 2, 4, 5, or 10 Bank units. (Not for use with the 6 Volt Battery Tender® Plus or any other Battery Tender® product with white quick-disconnect plugs.)

Use the 12.5 foot long lead extension with the Battery Tender® Junior, Plus, 2, 4, 5, or 10 Bank units. (Not for use with the 6 Volt Battery Tender® Plus or any other Battery Tender® product with white quick-disconnect plugs.)

2 independent charging stations, charges 6 volt and 12 volt batteries

Automatic switches to maintenance mode when battery is fully charged

Designed for dual battery systems, the Battery Isolator Kit connects between batteries only, no alternator or ignition connections required. Protects electronics during start up and saves the charge on the starting battery, while using electrical devices

For use with FIRSTGEAR® heated socks and gloves to allow for operation without the need for heated pants.

BMW-style plug with 18 in. of 16-AWG wire to a SAE connector. Plug is filled with sealant to secure wires and waterproof the plug.

Protects the portable Heat-Troller and includes a clip for attaching to belt or tank bag.

Protects the portable Heat-Troller and includes a clip for attaching to belt or tank bag.

Protects the portable Heat-Troller and includes a clip for attaching to belt or tank bag.

Can be used to plug a SAE plug into a portable Heat-Troller DC Coax battery harness.