Keep your Honda Pioneer useful long after the first snowfall. The Denali Pro UTV Snow Plow Kit for the Honda Pioneer helps clear long driveways, open paths to outbuildings and push snow away from gates and work areas. Its curved 19-inch scoop blade is reinforced for tough jobs and the 65-degree attack angle helps roll snow forward rather than simply shove it ahead.
When the cleanup’s done, quick-release push tubes make removing the plow easier, while 10-position angling helps direct snow where you want it. The kit includes a durable steel mount, adjustable skid feet, replaceable wear bar, rubber flap, plow flags and installation hardware. Equip your Pioneer and take winter cleanup into your own hands.
Kit Includes:
- UTV Snow Plow Blade - Pro Curved
- Pushtubes
- Wearbar
- Skid Feet
- Rubber Flap
- Plow Flags
- Installation hardware and instructions
Plow Mount Features:
- 1/4" steel
- 100% laser cut
- Black, industrial powder coat finish
- Includes mounting hardware and detailed instructions
Blade Features:
- Snow Plow Blade (19-inch scoop) and leading horizontal supports are formed from a single piece of 12-gauge steel
- Four 7-gauge ribs run the full height of the blade
- Three additional 7-gauge horizontal stabilizers support the deepest point of the blade
- 65-degree attack angle and over center design ensures snow rolls up and is thrown forward
- Replaceable 7-gauge steel wear bar included with every kit
- Height and angle adjustable skid feet included
Push Tube Features:
- Impact Resistant Reinforced Pivot Assembly - 2 additional support bars for maximum durability & strength
- Turn system allows you to easily position your plow in 10 different angles - 0, 12.5, 25
- Simple detachment system with the pull of a pin
- Structural tube steel cross bar for added lateral rigidity
- Quick Release Pins included
- 13.5 inches center to center for plow mount tabs
- Extended Push Tubes are designed to be used with SxS/UTVs that have tracks
Pushtube Lift Kits:
- Push tube Lift Kits bolt directly to the pushtubes, providing 2 or 4 inches of lift
- Pushtube Lift Kits allow plow installation on machines with skid plates, 13"-15" and 15"-17" off the ground
- Lift Kits are for use with DENALI UTV Standard Pushtubes only (not Extended Pushtubes)
Optional Hydroturn Features:
- Hydraulic system is sealed, no need to purchase hydraulic fluid, bleed lines, maintain a reservoir level or change the fluid
- Change the blade angle with ease without leaving your seat
- Heavy duty chrome plated 3/4" cylinder shaft
- No modifications necessary - bolts directly to the Denali UTV Plow Push Tubes
- Wire harness utilizes weatherproof connectors
Optional Plow Pulley Fairlead Features:
- Roller
- Replaces the winch fairlead during the plow season
- For use with Steel AND Synthetic cables
- Curved cable groove helps eliminate flattening and breaking of cable
- Bolt Patterns:
- Standard Spool: 3″ x 4.875″
- Wide Spool: 3″ x 6.67″
- Sheave
- Includes pulley, 1/4″ clevis hook and nylon strap
- Allows greater precision when raising/lowering plow blade and increases the angle of pull
- Cable
- 12′ length, 1/4″ diameter
- Single braid, dyneema rope with galvanized steel thimble/eyelet
- All the DENALI Plow Systems require a winch (not included) to raise and lower the plow blade.
- For the Honda Pioneer 1000 models, a small amount of trimming to the side tabs is required when using a KFI or WARN winch mount.
